You may have zero, one or more graphics windows active at same time:
s:Gr/MyGraphic1/Type = "OpenGL" # OpenGL, HepRep, VRML, DAWN, RayTracer, RayTracerX
Note that the file-based graphics systems, HepRep, VRML and DAWN may not show any image until at least one history is run. We will revisit this issue when we move to the next Geant4 version.
HepRep files are designed to be viewed in a Java application called HepRApp. Details can be found here.
Note that graphics can be one of the slowest parts of a simulation, so should be disabled if you are running a long simulation. To disable graphics, do one of the following three things:
- Comment out all of the
- Set all
- Disable graphics entirely, by setting:
b:Gr/Enable = "False"
This last option is essential of you want to run on a batch system that does not contain any OpenGL graphics drivers.
File-based graphics systems will also expect a file name:
s:Gr/MyGraphic1/FileName = "MyFileName" # Defaults to name of view (which here is MyGraphic1).
Will use this filename plus an
_n where n increments with each refresh.
Due to limitations in Geant4,
FileName only affects OpenGL and HepRep. For other cases, the file name is a fixed value,
g4_ followed by a file number.
This can be more than just a file name - it can include a relative or absolute file path, as in:
s:Gr/MyGraphic1/FileName = "../MyFileName" # one directory above current directory s:Gr/MyGraphic1/FileName = "~/SomeSubdirectory/MyFileName"
b:Gr/MyGraphic1/IncludeGeometry = "True" # defaults to "True" b:Gr/MyGraphic1/IncludeTrajectories = "True" # defaults to "True" b:Gr/MyGraphic1/IncludeStepPoints = "True" # Show trajectory step points, defaults to "False"
Colors are defined by specifying their red, green, blue components, each on a scale of 0 to 255, as in:
iv:Gr/Color/lightblue = 3 175 255 255
By default, trajectories will be drawn as what Geant4 calls “Smooth Trajectories”, which means they include additional points to make them curve smoothly in a magnetic field. Geant4 does not actually use these “auxiliary points” in its simulation results, they are just present to make visualization in a field look better. In some cases, Geant4 has trouble handling these auxiliary points, and reports:
``!!!!!!!! Filter: auxiliary points are being memory leaked !!!!!``
To work around this, turn off trajectory drawing or tell Geant4 not to making the trajectories smooth:
b:Gr/MyGraphic1/UseSmoothTrajectories = "False" # defaults to "True"
You can add axes to the display. Axes lines are colored red for X, green for Y, blue for Z:
b:Gr/MyGraphic1/IncludeAxes = "True" # defaults to "False" s:Gr/MyGraphic1/AxesComponent = "World" # Component in which to center the axes. Defaults to World. d:Gr/MyGraphic1/AxesSize = 3. m # size of axes
Note that on most OpenGL graphics systems, the shadowing on the arrowheads allows you to tell whether a given axis is coming towards or away from you.
You can visualize magnetic fields, with field intensity and direction depicted through a set of arrows:
i:Gr/ViewA/MagneticFieldArrowDensity = 10
Use with caution. When combined with rotation seems to sometimes cause crashes in polycone drawing (involved in drawing the arrowheads).
By default, graphics views will refresh after every run. But you can change this to show each history individually or to accumulate all histories for the entire session (multiple runs). This applies globally to all graphics views:
s:Gr/RefreshEvery = "History" # "History", "Run" or "Session"
If parallel worlds are present, by default they will be visible. If you instead want to see only the main world, specify:
sv:Gr/MyGraphic1/VisibleWorlds = 1 "World" # "World", "All" or one or more specific world names
To turn off a graphic:
b:Gr/MyGraphic1/Active = "False" # defaults to "True"
Extra options used by OpenGL:
u:Gr/MyGraphic1/Zoom = 2. # increase to zoom in, decrease to zoom out d:Gr/MyGraphic1/Theta = 45. deg # view angle as in /vis/viewer/set/viewpointThetaPhi d:Gr/MyGraphic1/Phi = 45. deg # view angle as in /vis/viewer/set/viewpointThetaPhi u:Gr/MyGraphic1/TransX = 0. # move left or right in the view window d:Gr/MyGraphic1/TransY = 0. # move up or down in the view window s:Gr/MyGraphic1/Projection = "Perspective" # Defaults to "Orthogonal" d:Gr/MyGraphic1/PerspectiveAngle = 10. deg # Increase for stronger perspective effect i:Gr/MyGraphic1/WindowSizeX = 600 i:Gr/MyGraphic1/WindowSizeY = 600 i:Gr/MyGraphic1/WindowPosX = 0 i:Gr/MyGraphic1/WindowPosY = 0 b:Gr/MyGraphic1/HiddenLineRemovalForGeometry = "False" # Remove hidden lines from wireframe geometries, like Geant4’s /vis/viewer/set/hiddenEdge b:Gr/MyGraphic1/HiddenLineRemovalForTrajectories = "False" # Remove hidden trajectories lines from within geometries, like Geant4’s /vis/viewer/set/hiddenMarker
You can set Topas so that for OpenGL views, the view is copied to a file at the end of each run:
b:Gr/MyGraphic1/CopyOpenGLToPDF = "True" # save to PDF b:Gr/MyGraphic1/CopyOpenGLToSVG = "True" # save to Scalable Vector Graphics b:Gr/MyGraphic1/CopyOpenGLToEPS = "True" # save to Encapsulated PostScript b:Gr/MyGraphic1/CopyOpenGLToPS = "True" # save to PostScript
Some views may result in one of the following warning messages from Geant4 Visualization. These messages are just informational and can be safely ignored. Note that even if you have set
Gr/RefreshEvery = "History", the view will only be copied to a file at the end of the run (not per history).
"WARNING: Viewpoint direction is very close to the up vector direction. Consider setting the up vector to obtain definable behavior." "G4PhysicalVolumeSearchScene::FindVolume: Required volume "Phantom3_10x10x1", copy no. 0, found more than once. This function is not smart enough to distinguish identical physical volumes which have different parentage. It is tricky to specify in general. This function gives you access to the first occurrence only."
To create movies,
PerspectiveAngle can be controlled by Time Features.
s:Gr/MyGraphic1/ColorBy = "Charge" # "Charge", "ParticleType", "OriginComponent", "Energy", "Momentum", "Generation", "CreatorProcess"
ColorBy = "Charge", trajectories default to red, greed, blue for negative, neutral and positive. You can override these defaults with:
sv:Gr/MyGraphic1/ColorByChargeColors = 3 "blue" "green" "red" # colors for neg, neutral, pos
ColorBy = "ParticleType", colors are Geant4 defaults:
You can override these settings with (particle names are described here):
sv:Gr/MyGraphic1/ColorByParticleTypeNames = 4 "e-" "gamma" "proton" "neutron" # any number of particle names sv:Gr/MyGraphic1/ColorByParticleTypeColors = 4 "red" "green" "blue" "yellow" # for each particle type above. All other particles will be set to grey.
ColorBy = "OriginVolume", trajectories are grey unless they come from a named volume in:
sv:Gr/MyGraphic1/ColorByOriginVolumeNames = 1 "Propeller20/Leaf" # one or more volume sv:Gr/MyGraphic1/ColorByOriginVolumeColors = 1 "red" # one color for each name above
ColorBy = "OriginComponent", trajectories are grey unless they come from a named component in:
sv:Gr/MyGraphic1/ColorByOriginComponentNames = 1 "jaws" # one or more component names sv:Gr/MyGraphic1/ColorByOriginComponentColors = 1 "red" # one color for each name above
ColorBy = "ColorByOriginComponentOrSubComponentOf", trajectories are grey unless they come from a named component or any of its subcomponents in:
sv:Gr/MyGraphic1/ColorByOriginComponentNames = 1 "Nozzle" # one or more components sv:Gr/MyGraphic1/ColorByOriginComponentColors = 1 "red" # one color for each name above
ColorBy = "Energy":
dv:Gr/MyGraphic1/ColorByEnergyRanges = 3 1. 4. 8. MeV # limits of energy ranges sv:Gr/MyGraphic1/ColorByEnergyColors = 4 "red green blue yellow" # one for every energy interval that is defined by those ranges - one more value than number of ranges since includes less than first range value and greater than first range value
ColorBy = "Momentum":
dv:Gr/MyGraphic1/ColorByMomentumRanges = 3 1. 4. 8. MeV # limits of momentum ranges sv:Gr/MyGraphic1/ColorByMomentumColors = 4 "red" "green" "blue" "yellow" # one for every energy interval that is defined by those ranges - one more value than number of ranges since includes less than first range value and greater than first range value
ColorBy = "Generation":
sv:Gr/MyGraphic1/ColorByGenerationColors = 2 "red" "green" # colors for primary and secondaries
ColorBy = "CreatorProcess":
sv:Gr/MyGraphic1/ColorByCreatorProcessNames = 5 "eBrem" "annihil" "Decay" "eIoni" "hIoni" # one or more process name sv:Gr/MyGraphic1/ColorByCreatorProcessColors = 5 "red" "green" "blue" "yellow" "magenta" # one for every process name
sv:Gr/OnlyIncludeParticlesNamed = 2 "proton" "neutron" # one or more particle names sv:Gr/OnlyIncludeParticlesCharged = 1 "negative" # one or more "positive", "negative" or "neutral" sv:Gr/OnlyIncludeParticlesFromVolume = 1 "Propeller20/Leaf" # one or more volume sv:Gr/OnlyIncludeParticlesFromComponent = 1 "Jaws" # one or more component sv:Gr/OnlyIncludeParticlesFromComponentOrSubComponentsOf = 1 "Nozzle" one or more d:Gr/OnlyIncludeParticlesWithInitialKEBelow = 1. MeV # maximum energy d:Gr/OnlyIncludeParticlesWithInitialKEAbove = 10. MeV # minimum energy d:Gr/OnlyIncludeParticlesWithInitialMomentumBelow = 1. MeV # maximum momentum d:Gr/OnlyIncludeParticlesWithInitialMomentumAbove = 10. MeV # minimum momentum sv:Gr/OnlyIncludeParticlesFromProcess = 1 "hIoni" # one or more process name
Note that the following three filters may cause a crash if the particle origin is at the world boundary:
sv:Gr/OnlyIncludeParticlesFromVolume sv:Gr/OnlyIncludeParticlesFromComponent sv:Gr/OnlyIncludeParticlesFromComponentOrSubComponentsOf
We will study this issue again when we move to the next Geant4 version.
Visualization control for a specific component is done as part of the
Ge/ parameters for that component rather than in the
s:Ge/MyComponent/Color = "red" s:Ge/MyComponent/DrawingStyle = "Solid" # "Solid", "Wireframe" or "FullWireFrame". # FullWireFrame includes drawing of additional edge lines that Geant4 calls "soft edges" # - on many graphics devices WireFrame and FullWireFrame give the same result i:Ge/MyComponent/VisSegsPerCircle = 100 # Number of line segments to use to approximate a circle, defaults to 24. Set to a larger number if you want a smoother curve b:Ge/MyComponent/Invisible = "True" # defaults to False meaning visible
We sometimes see error messages from visualization of the following form:
G4PhysicalVolumeSearchScene::FindVolume: Required volume "PhantomCentralDose_1x1x40", copy no. 0, found more than once...
Such messages can be ignored. They do not affect the simulation results. We will revisit how to solve these error messages once we move to the next Geant4 version.