User_Beamline_WC_Viewer.txtΒΆ

includeFile = UCSF_Beamline_Base.txt Viewer.txt
# ===============================================#
# This example shows Waterphantom expansion
# as a function of time
# ===============================================#

Ph/Default/Modules = 1 "g4em-standard_opt0"
Ge/Nozzle/TransZ  = -133.66 cm

# ===============================================#
# Many of components are not included
# ===============================================#
Ge/ExtWindow/Include      = "TRUE"
Ge/WireChamber/Include    = "TRUE"
Ge/Collimator1/Include    = "TRUE"
Ge/IonChamber1/Include    = "TRUE"
Ge/Collimator2/Include    = "TRUE"
b:Ge/Collimator3/Include     = "FALSE"
b:Ge/IonChamber2/Include     = "TRUE"
b:Ge/PatientShield/Include   = "TRUE"
b:Ge/PatientAssembly/Include = "TRUE"

# ===============================================#
#Water phantom Thickness is under control by TimeFeature
# ===============================================#
Ge/WC_Water/HL			= 0.001 mm + Tf/WCThickness/Value
s:Tf/WCThickness/Function="Linear mm"
d:Tf/WCThickness/RepetitionInterval=30.0 ms
d:Tf/WCThickness/Rate=3. mm/ms
d:Tf/WCThickness/StartValue=0.0 mm


# ===============================================#
# Execution setting
# ===============================================#
i:So/Default/NumberOfHistoriesInRun = 2
So/Default/BeamEnergySpread = 0.0
Ts/PauseBeforeSequence = "False"
Ts/ShowHistoryCountAtInterval = 1
d:Tf/TimelineEnd=12.0 ms
i:Tf/NumberOfSequentialTimes=120

# ===============================================#
# Visualization
# ===============================================#
i:Gr/ViewA/WindowSizeX = 1024
i:Gr/ViewA/WindowSizeY = 768
d:Gr/ViewA/Theta = 90 deg
d:Gr/ViewA/Phi = 0 deg
u:Gr/ViewA/TransX = -0.06
b:Gr/ViewA/IncludeAxes = "True"
u:Gr/ViewA/Zoom = 25
s:Gr/ViewA/AxesComponent = "WC_Container"
b:Gr/ViewA/CopyOpenGLToEPS = "False"